| รายละเอียดสินค้า |
LTC 8016/90 Allegiant Bilinx Data Interface
Features
- Bilinx technology interface for Allegiant Series matrix switcher/controllers
- Up-the-coax Pan/Tilt/Zoom (PTZ), auxiliary, and pre-position control
- Down-the-coax event reporting
- Auto-sensing setup for simplified installation
- Data input allows other devices to control Bilinx PTZ cameras
- Cascade units to control up to 496 Bilinx cameras
Specification
| Voltage Range |
108 to 264 VAC, 50/60 Hz |
| Power at Rated Voltage |
15 W |
| Maximum Video Signal Distances |
|
| Coax |
Up to 300 m (1000 ft) using standard CCTV-grade RG-59U with copper center conductor and copper braided shield; up to 600 m (2000 ft.) using CCTV-grade RG-11 or RG-6. |
| Fiber |
Up to 600 m (2000 ft) using LTC 4630 and LTC 4631 Series fiber optic modules. Note: This distance includes the length of coax cables used between the devices and the fiber optic link. |
| Other |
Up to 230 m (750 ft) using CAT5E cable that meets ANSI/TIA/EIA-568-A requirements with NV-211 or NV-214 A-M BNC-to-twisted Balun devices (or similar passive device pair). Note: When using twisted pair links of this type, some degradation in video quality may be experienced at distances beyond 150°m (500°ft). |
| Front Panel Indicators |
|
| Status / Power |
LED |
| Rear Panel Indicators |
|
| System Data Link Indicator |
Green LED |
| Data Activity Indicator |
Yellow LED |
| Bi-Phase Code Indicator |
Green LED |
| Bilinx Video Signal Presence |
One (1) green LED for each of 16 channels |
| Ethernet Port |
Green LED indicates link; Yellow LED indicates activity |
| Rear Panel Controls |
|
| Group ID |
Three (3) rotary switches |
| Rear Panel Connectors |
|
| Bilinx Video Inputs |
16 BNC connectors; accepts standard NTSC/PAL baseband composite video signals or video signals from Bilinx-capable cameras; 0.5–1.4 Vp-p; 75 Ohm terminated; TVS protected inputs provide improved protection against transients |
| Video Outputs |
Male 34-pin video ribbon connector; provides 16 video outputs (unity gain using active circuitry); mating 2 m (6°ft) 16-channel LTC 8809/00 cable included |
| Bi-Phase Data Interface |
6-position removable terminal block with "+"," –", and "shield" input connections and "+"," –", and "shield" looping output connections, with attached end-of-line termination resistor |
| PC Interface |
Male 9-pin sub D-connector |
| RS-232 Data Interface1 |
Female 9-pin sub D-connector for Allegiant RS-232 interface |
| RS-485 Data Interface1 |
Female 9-pin sub D-connector for Allegiant RS-485 interface port connection |
| RS-485 ‘Looping’ Data Interface1 |
Female 9-pin sub D-connector, for data interface to cascaded LTC 8016 unit |
| 1.One (1), 2 m (6 ft) data interface cable is supplied for use with the Allegiant RS-232 interface, the Allegiant RS-485 interface, or the cascade configuration looping connection. |
|
| Ethernet Interface |
RJ-45 connector, supporting 10/100 BaseT (reserved for future use) |
| Power Cord |
Two (2) detachable 3-wire IEC cords with grounded plug, 1.83 m (6 ft.); one with European continental plug type and one with US plug type |
| |
|
Temperature
|
| Operating |
0°C to 50°C (32°F to 122°F) |
| Storage |
–10°C to 70°C (14°F to 158°F) |
| Humidity |
0% to 90% relative, non-condensing |
| |
|
| Construction |
Steel chassis with sheet metal cover and plastic bezel |
| Finish |
Charcoal case |
| Dimensions (W x D x H) |
440 x 305 x 40 mm (17.3 x 12 x 1.7 in.) |
| Weight |
3.8 kg (8.5 lb) |
| Rack-mount Kit (included) |
For mounting unit in an EIA 48 cm (19 in.) rack |
| |
|
| LTC 8508/01 Ribbon-to-BNC Interface Cable |
|
| Interface cable with a 34-pin ribbon cable on one end and 16 male BNC connectors on the other end. This cable is required when the LTC 8016 unit will be connected to control system devices that do not contain a 34-pin ribbon cable connector. |
|
| LTC 8807/00 BNC Panel Interface panel used to convert video ribbon cables from up to two LTC 8016 units into 32 standard female BNC connectors. Useful when the LTC 8016 unit will be separated from the control unit beyond the 2 m (6 ft)distance allowed by the video ribbon cable supplied with the unit. |
|
| LTC 4630, LTC 4631 Fiber Optic Series modules compatible with Bilinx communication. Available in surface-mount and rack- mount models. Refer to the LTC 4600 Series data sheet for complete information on these products. |
|
| NV‑211 or NV‑214 A‑M BNC-to-twisted pair adaptors passive (non-amplified) devices compatible with Bilinx technology, allowing transmission of real-time monochrome or color video over unshielded twisted pair (UTP) telephone wire. Refer to the NV-214 A-M Series data sheet for complete information on these products. |
| Allegiant Matrix Switchers |
Requires an Allegiant CPU firmware 8.6 or later (released May 2004) |
| AutoDome Cameras |
All models manufactured October 2003 (version 5.11), or later |
| Dinion Cameras |
Dinion Series manufactured March 2004, or later |
| Bi-Phase Devices |
Any product generating standard Allegiant Bi-Phase Control Code protocol |
|
Bosch กล้องวงจรปิด และระบบรักษาความปลอดภัย
ธ.กสิกรไทย
